Monday, August 27, 2018

Code Alarm CA1051 Remote Programming Instructions

This Code Alarm CA1051 system uses replacement remote: H5OT43, H5OT49, CATX4

Important: System can be paired with 4 remote. If you pair another remote while your system's limit has reached it will start to delete other remotes from it's memory in a chronological order.

Here's how you program your new and existing remote:

1. Turn the ignition ON.
2. Press and hold the valet/override button.
3. Within 10 seconds the system will chirp/flash the parking lights (3) times.
4. Press LOCK of each remote you wish to program. The system will respond with 1 chirping for each accepted remote codes.
5. Turn the ignition OFF once you're done. The system will also turn programming mode off automatically after 15 seconds of inactivity.

Important: This system has 1 button programming which programs all channels of the system.

If you can't find your valet switch click here.

No comments:

Post a Comment

Comment below