Tuesday, August 28, 2018

Code Alarm CA2051 Remote Programming Instructions

This Code Alarm CA2051 system uses replacement remote: H5OT43, H5OT49, CATX4

NOTE: This system can only program to 4 remotes.

Follow steps to program the remote:

1. Turn the ignition switch ON.
2. Press and hold the valet button.
3. In 10 seconds the system will chirp/flash the parking lights (3) times.
4. Press the LOCK button of each remotes you're programming and system will respond with chirping once for each accepted remote codes.
5. Turn the ignition switch OFF once you're done. And the system will also turn programming mode off automatically after 15 seconds of inactivity.

NOTE: This system has 1 button programming which programs all channels of the system.

If you can't find your valet switch click here.

No comments:

Post a Comment

Comment below