Saturday, August 25, 2018

Code Alarm CA510 Remote Programming Instructions

This Code Alarm CA510 system uses replacement remote: ELVATCG, CATX510

The keychain transmitters included with the system have been pre-programmed at the factory. Each button has been pre-assigned to control a specific function of the system. The system will store codes from up to 4 different transmitters. The first transmitter programmed to the system will be erased from the system’s memory if a 5th transmitter is programmed.

To program new or additional transmitters:

1. Turn the ignition switch to ON position.
2. Press and release the programming button switch 3 times.
3. The dash Mounted LED will flash 1 time, and the parking lights will flash 1 time, indicating that the system is ready to accept programming of channel 1 which is LOCK.
4. Press and hold the lock icon button of the transmitter you wish to program for 4 seconds or until a long flash from the parking lights.
4a. Repeat step 4 for any additional transmitter you wish to program.
5. Press release the programming button switch 1 time to advance to channel 2. The parking lights will flash 2 times and the dash mounted LED will flash 2 times, indicating that the system is ready to accept programming for channel 2 which is UNLOCK.
6. Press and hold the unlock icon button of the transmitter you wish to program for 4 seconds or until a long flash from the parking lights.
6a. repeat step 6 for any additional transmitter you wish to program.
7. Press and release the programming button switch 1 time to advance to channel 3. The parking lights will flash 3 times and the dash mounted LED will flash 3 times, indicating that the system is ready to accept programming for channel 3 which is REMOTE START.
8.Press and hold both buttons simultaneously of the transmitter you wish to program for 4 seconds or until a long flash from the parking lights.
8a. Repeat step 8 for any additional transmitter you wish to program.

If you can't find your valet switch click here.

If your vehicle's system was installed without the valet switch you can order one and install it to make it easier to do the programming.

No comments:

Post a Comment

Comment below