Saturday, August 25, 2018

Code Alarm CA520 Remote Programming Instructions

This Code Alarm CA520 system uses replacement remote: ELVATCG, ELVATEC

1. Turn the key in the ignition to ON position.

2. Press and release the valet switch 3 times. The dash mounted LED will flash once and parking lights will flash once, indicating the system is ready to accept programming for LOCK.

3. Press and hold the LOCK button on the remote for 4 seconds or until you see the parking lights flashes. Repeat step 3 for each additional transmitter you wish to program.

4. Turn the key in the ignition to the OFF position and test the remote.

If you can't find your valet switch click here.

No comments:

Post a Comment

Comment below