Monday, August 27, 2018

Code Alarm PRO F60/65 Remote Programming Instructions

This Code Alarm PRO F60/65 system uses replacement remote: GOH-FRDPC2002, 1010686

Remember: Your system can only keep 4 remote codes, and will start deleting saved remote codes in chronological order if you try to program another remote while it has reached it's limit.

Do these steps to program a remote(s).

1. Insert the key in the ignition and turn it to the ON position.
2. Press and hold the valet/override button.
3. Within 10 seconds, system will chirp/flash the parking lights 3 times.
4. Press the 1st Button of each remote you'd like to program. You'll hear a chirp for each learned remote (maximum of 4 remotes).
5. Turn the key in the ignition to OFF position once you're finish programming.

Remember: System has 1 programming button which programs all channels of the system.

If you can't find your valet switch click here.

No comments:

Post a Comment

Comment below