Saturday, September 1, 2018

DEI Automate AM2 Remote Programming Instructions

This DEI Automate AM2 system uses replacement remote: 473A, EZSDEI474V

Refer to the owner's wallet card to find out which system (ignition or start) you have before performing the steps given below.

Follow the steps if you have Starter.

1. Turn the key to start position. if the vehicle did not start you can proceed to step 3. If the vehicle starts then the starter kill system is not armed. Go to step 2.
2.  Turn key off and wait for 40 seconds. Turn the key to the start position and the vehicle should not start.
3. Turn the key OFF and then cycle the key from off to start position 3-times within 5 seconds and then hold in the start position on the 4th turn.
4. Press button 1 on the transmitter within 5 seconds (the starter cranks). Re do steps above to program your additional remotes. (maximum of 4)
5. Turn the key OFF and wait 30 seconds. Press transmitter button 1, turn the key to start, the vehicle should not start. Test transmitter button 2. Turn the key to ignition and press transmitter button 2. Turn the key to start. the vehicle should crank and start.

Follow these steps if you have Ignition.

1. Turn the key to the ignition position. if the power is present, then the ignition kill system is not armed. If no power is present go to step 3.
2.  Turn key off and wait for 40 seconds. Turn the key to the ignition position again. Power should be present.
3. Turn the key OFF and then cycle the key from off to ignition position 3-times within 5 seconds and then hold in the ignition position on the 4th turn.
4. Press button 1 on the transmitter within 5 seconds (ignition has power). Re do steps about to program your additional remotes. (maximum of 4)
5. Turn the key OFF and wait 30 seconds. Press transmitter button 1, turn the key to ignition position. The ignition should not have power. Test the remote's button 2. Turn the key to ignition and press remote button 2. Turn the key to start. the vehicle should crank and start.

If you can't find your valet switch click here.

No comments:

Post a Comment

Comment below